Motorola MTP3150 Feature User Manual Download

Page: 116 / 144

4.16.1

Viewing Data Statistics

Procedure:

From the home screen, press the

Menu

key.

Select

Packet Data

NOTICE:

Data services are only available in TMO Mode. The data option must be set to

Voice Data

Data Only

Select one of the following options:

•

Sent Data

– The number of KBs sent and throughput since current Packet Data activation is

displayed.

•

Received Data

– The number of KBs received and throughput since current Packet Data

activation is displayed.

•

Bandwidth

– Active data session percentage is shown.

•

Failed Transfer

– The percentage of failed sent/received packets.

NOTICE:

N.A. – Standby packet data session.

4.16.2

Viewing Encryption Status

Procedure:

From the home screen, press the

Menu

key.

Select

Packet Data

→

Encryption

The encryption state of the ongoing packet data session is displayed:

•

Packet Data Channel Clear

•

Packet Data Channel Encrypted

•

Encryption N/A

(clear)

68015000797-EH
Chapter 4: Main Menu

116

Summary of Contents for MTP3150
















































































































































Search results

Summary of Contents for MTP3150

Reviews:

Related manuals for MTP3150

Brands by name

Popular brands

Motorola MTP3150, Feature User Manual

Search results

Summary of Contents for MTP3150

Reviews:

Related manuals for MTP3150

Brands by name

Popular brands