Motorola MTM800E Feature User Manual Download Page 60

Page: 60 / 206

Upon selecting “Specific”, you will see one of the following
displays:

• The selected gateway address (e.g.:

1022), pre-programmed by your
Service Provider or previously
entered by yourself via the keypad.
Press

Edit

and then

to use the

current address, or press

Edit

and

enter a new address via the keypad, and press

. The

Gateway and Repeater icons will flash upon selecting
the gateway.

• “None”, indicating that no gateway was selected for that

talkgroup. Enter an address via the keypad, and press

. The Gateway and Repeater icons will flash upon

selecting the gateway.

When the MTM800E detects the
appropriate gateway and/or the repeater,
the Gateway and/or Repeater icons will
turn solid, respectively.

Making a DMO Group Call (MS to MS)

Enter

Direct Mode

by pressing

Optns

and selecting

Direct Mode

Make sure that you have selected the
required group. Press and hold the

PTT

button.

Wait for the talk permit tone and then
speak into the microphone. Release the

PTT

button to

listen.

Selected Gateway

1022

Back

Select

GW options:

DMO Folder 1

Police

Hello

Contcs

Optns

DMO Folder 1

Police

Hello

Contcs

Optns

Summary of Contents for MTM800E















































































































































































































Search results

Summary of Contents for MTM800E

Reviews:

Related manuals for MTM800E

Brands by name

Popular brands

Motorola MTM800E, Feature User Manual

Search results

Summary of Contents for MTM800E

Reviews:

Related manuals for MTM800E

Brands by name

Popular brands