Motorola MT2070, User Manual

Page: 83 / 606

Operating the MT2070/MT2090 2 - 35
MCL
When you select MCL from the Home screen, the MCL-Client loads and the MCL program which loaded on the
device runs.
Figure 2-37
MCL-CIient Load - Typical View
By default, the MCL application on the device is a simple scanning application which performs scanning and
sending bar codes to a host computer, and scanning inventory with a timestamp.
MCL-Collection is an intuitive, high-productivity software tool used to create, integrate and deploy enterprise,
multimodal mobile worker applications quickly and easily. From bar code scanning and data capture on devices to
ODBC, WMS, or SAP R/3 connectivity on the host, MCL-Collection provides seamless integration from the
computer to host application.
For more information refer to the MCL Technologies Start Up Guide for the MT2000 at:
http://www.mcl-collection.com .
When the MCL-Client loads, the Main Menu screen of the default MCL program loads. On this screen, select the
mode ( Scan Transmit on page 2-36 or Scan Inventory on page 2-37 ) of the MCL default scanning application.
Figure 2-38
MT2000 Default Application Home Screen - Typical View
NOTE The MCL client is pre-licensed on the MT2070 only. The MCL client on the MT2090 requires an activated
license to run.