Motorola MT2070 User Manual Download

Page: 73 / 606

Operating the MT2070/MT2090 2 - 25

Options...

Scroll to

Options

and press

ENT

to configure the inventory application. On this screen, set the file format and the

file storage location to save data. The format is specified in an xml file located in the folder

\application\inventory

Press the Up or Down

Scroll

key to move from field to field. Use the keypad to enter a value in the

File:

field; Press

the right or left

Scroll

key to change the data within all other fields.

Figure 2-23

Options Screen

•

File:

Specify a file type.

•

Format:

Specify a Text of XML file format.

•

Separator: Specify a delimiter (comma, semi-colon or tab).

•

Grouped:

Currently not implemented.

•

Clear Delay:The time in seconds data is automatically cleared from the display after scanning.

•

Cancel:

Press to cancel settings and return to previous screen.

•

Done:

Press to save settings and return to previous screen.

About...

Displays information about the

ScanInventory

application.

Close

Scroll to

Close

and press

ENT

to exit and return

Home

Summary of Contents for MT2070































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MT2070

Reviews:

Related manuals for MT2070

Brands by name

Popular brands

Motorola MT2070, User Manual

Search results

Summary of Contents for MT2070

Reviews:

Related manuals for MT2070

Brands by name

Popular brands