Motorola MT2070, User Manual

Page: 583 / 606

Quick Startup Exercises G - 3
Establishing a Bluetooth (BT) Connection Using Open Bluetooth
Exercise: Follow the steps below to connect as HID slave and Serial Port Profile slave, and transmit data to
Notepad and HyperTerminal. Required equipment: MT2000, laptop with built-in BT or BT dongle.
To connect as HID slave:
1.
Open Scan Item from Home menu.
2.
Scan Set Default Parameter on page 5-4 .
3.
Scan Bluetooth Keyboard Emulation (HID Slave) on page 4-5 .
4.
Scan Variable PIN Code Mode on page 4-27 (this allows the pin generated by the BT enumerator to stay on
the monitor long enough to enter into the MT2000).
5.
On the laptop, open Discover available BT devices . Click on the MT2000 and click Next .
6.
The pin should be displayed. Use the keypad to enter the pin code into the MT2000 and click Enter to accept.
7.
The BT icon on the top left corner of the MT2000 screen should fill in green.
8.
Open Microsoft Word on the laptop and use the MT2000 to scan a product bar code. If the BT connection is
successful, the bar code value should display in Word.
To connect as Serial Port Profile slave:
1.
Scan Set Default Parameter on page 5-4 .
2.
Scan Serial Port Profile (Slave) on page 4-5 .
3.
On the laptop, open Discover available BT devices . Click on the MT2000 and click Next .
4.
Depending on your BT enumerator it should prompt you to enter a PIN code. In the enumerator on the laptop,
enter 12345. View the COM port assigned.
5.
The BT icon on the top left corner of the MT2000 screen should fill in green.
6.
Open HyperTerminal and scan a product bar code.
NOTE This is not using BTExplorer.
NOTE
PC/laptop manufacturers may use different screens throughout enumerator configuration. The exercise
below is a generic setup.