Motorola MK4000 MicroKiosk Product Reference Manual Download

Page: 109 / 136

Wireless Configuration B - 41

Versions Window

The

Versions

window displays software, firmware, and hardware version numbers.

To open the

Versions

window, tap

Versions

in the

Wireless Status

window.

Figure B-35

Versions Window

The window displays software version numbers as well as application and middleware version information.

Wireless Diagnostics Application

The

Wireless Diagnostics

application window provides links to perform ICMP Ping, Trace Routing, and Known APs.

To open the

Wireless Diagnostics

window, tap the

Signal Strength

icon >

Wireless Diagnostics

Figure B-36

Wireless Diagnostics Window

The

Wireless Diagnostics

window contains the following options. Tap the option to display the option window.

•

ICMP Ping - tests the wireless network connection.

•

Trace Route - tests a connection at the network layer between the device and any place on the network.

•

Known APs - displays the APs in range using the same ESSID as the device.

•

Quit - Exits the

Wireless Diagnostics

window.

Option windows contain a back button to

return to the

Wireless Diagnostics

window.

Summary of Contents for MK4000 MicroKiosk









































































































































Search results

Summary of Contents for MK4000 MicroKiosk

Reviews:

Related manuals for MK4000 MicroKiosk

Brands by name

Popular brands

Motorola MK4000 MicroKiosk, Product Reference Manual

Search results

Summary of Contents for MK4000 MicroKiosk

Reviews:

Related manuals for MK4000 MicroKiosk

Brands by name

Popular brands