Motorola MK1200 Product Reference Manual Download

Page: 33 / 232

Installation

2 - 3

MK1200 Mounting

If desired, mount the MK1200 on a wall, pole, or counter top using the following optional mounting accessories:

•

Wall Mounts

•

Pole Mount Kit, see

page 2-6

Figure 2-1

Mounting Dimensions

NOTE

The MSR increases the width of the MK1200 from 8.92 inches to 11.5 inches. The height and depth do
not change.

1.29

7.93

It can also be placed into a flush panel kiosk environment by setting it into an 8.0 x 8.63 opening.

interface standard mounting brackets or Symbol's keyhole slide-on mounting brackets.

All dimensions provided in inches.
The MK1200 is designed to be used with VESA flat panel monitor physical mounting

Notes:

.68

8.51

0.41

1.65

1.28

1.81

8.92

0.68

7.57

10.74

3.51

5.00

1.4

mounting f

ace

ESA/k

yhole

0.312 dia.

head

mounts 0.19 dia.

shank,

yhole slide-on

4.00

physical mounting interface standard

(M4 screw) per

ESA flat panel monitor

(4X) 4 mm x .7 pitch threaded holes

3.94

Summary of Contents for MK1200









































































































































































































































Search results

Summary of Contents for MK1200

Reviews:

Related manuals for MK1200

Brands by name

Popular brands

Motorola MK1200, Product Reference Manual

Search results

Summary of Contents for MK1200

Reviews:

Related manuals for MK1200

Brands by name

Popular brands