Motorola MK1200 Product Reference Manual Download

Page: 198 / 232

F - 10 MK1200 MicroKiosk for CE .NET 4.2 Product Reference Guide

Calibrating the Screen

Use the

Calibration

screen to align the touch screen:

Remove and restore power to the MK1200 to reboot.

From the

Windows CE Desktop

window, press buttons

, and

simultaneously to display the

Calibration

screen.

Figure F-15

Calibration Screen

Carefully press and briefly hold the stylus tip on the center of the

Calibration

screen target. Repeat the

procedure as the target moves and stops at different locations on the screen.

The

Confirm Calibration Resave

screen displays. Press the left two buttons (

and

) to accept the new

settings or press the right two buttons (

and

) to retain the existing calibration settings.

Figure F-16

Save Settings, Calibration Screen

NOTE

To access the

Calibration

screen from the Windows CE Control Panel, tap

Start > Settings > Control

Panel

. Double-tap the

Stylus

icon, tap the

Calibration

tab, and tap the

Recalibrate

button. The

Calibration

screen displays.

Summary of Contents for MK1200









































































































































































































































Search results

Summary of Contents for MK1200

Reviews:

Related manuals for MK1200

Brands by name

Popular brands

Motorola MK1200, Product Reference Manual

Search results

Summary of Contents for MK1200

Reviews:

Related manuals for MK1200

Brands by name

Popular brands