Motorola MK1200 Product Reference Manual Download

Page: 186 / 232

E - 8

MK1200 MicroKiosk for CE .NET 4.2 Product Reference Guide

Sending the Hex Image

After building the hex file, download it to the device using IPL. See

IPL Menu Navigation on page F-3

for

detailed procedures.

Saving the Script

Save the script if changes were made since last saving it.

TCM Error Messages

Select the

Execute

button to validate the cells in the partition table. Cells highlighted in red contain an error.

Partition loading is disabled until all errors are corrected. Following are errors that TCM can encounter and
possible solutions.

Table E-2

TCM Error Messages

Error

Description/Solution

Failed to build images: flash file
system DLL not loaded!

TCM could not load the DLL required to build images for the target flash
file system. Reinstall TCM or recover the DLL.

Failure finding directory xxx

Build process failed because directory xxx was not found.

Failure creating volume

Build process failed because a certain disk volume could not be
created.

Failure adding system file to image

Build process failed because TCM failed to add a certain system file to
the disk image.

INVALID PATH

The path for the image file to build is not valid.

Nothing Selected To Build

In the

Config Build

window, no item is selected to build.

Disk Full

TCM failed to create Hex image file at the selected path. Check
available disk space.

Target Disk Full

Build process failed because TCM failed to add file to the image of a
disk volume. Remove some files or increase the disk size.

Hex file is READ ONLY

The Hex image file to be created exists and is read-only. Delete the
existing file or change its attribute.

Error opening the file xxx with write
access

TCM could not open file xxx with write access. Check if file is in use.

Failure creating binary file

TCM failed to open/create an intermediate binary file.

Hex File To load is missing or
invalid

Load Terminal

window, the file selected to load has invalid status.

Could not locate device name in
TCM.ini file

While loading the

Script Properties

window, TCM could not find the

TCM.ini section corresponding to the device type specified by the
current opening script. Either TCM.ini or the script file is invalid.

Summary of Contents for MK1200









































































































































































































































Search results

Summary of Contents for MK1200

Reviews:

Related manuals for MK1200

Brands by name

Popular brands

Motorola MK1200, Product Reference Manual

Search results

Summary of Contents for MK1200

Reviews:

Related manuals for MK1200

Brands by name

Popular brands