Motorola MK1200, Product Reference Manual

Page: 185 / 232

Terminal Configuration Manager E - 7
Building the Image
Before building the image, TCM checks the script to verify that all files referenced in the script exist.
To check a script:
1.
In the Script Window, select the script.
2.
Save the script, if not already saved.
3.
From the
Script
menu, choose
Check
,
OR
On the toolbar, choose .
4.
TCM verifies that files referenced in the script exist on available drives and lists an error message in the Errors
found box for any missing files.
5.
Click OK to exit.
To build a script:
1.
In the Script Window, select the script to be built.
2.
From the
Script
menu, select
Build
,
OR
On the toolbar, choose . The Configure Build window displays.
3.
Select the item to build. If an application is selected to build, specify the application.
4.
Select Compression for the hex image, which reduces the size of most hex images to speed downloading.
Click
OK .
5.
TCM performs a check. If the script has no errors, TCM builds the partition which can be transferred using IPL
to the MK1200 as a hex file.
If the build fails, TCM displays a message indicating which file(s) are missing.
If the amount of flash required by the script exceeds the image size, a TCM error results. To correct this, reduce the
number of files in the partition. See
Defining Script Properties on page E-4 for more information on setting the
image size.
NOTE Performing a check is more important for existing scripts to ensure that files referenced in the script are
still in the designated locations.