Minitor IV
Pager Programming Guide
Getting
Started
Getting Started
The Minitor IV Pager Programmer Software (PPS) and interface package,
combined with an IBM personal computer (or compatible), provides the
flexibility to program Motorola Minitor pagers to meet individual requirements.
To obtain the best results from the product, please take a few minutes to read
this instruction guide.
Equipment Required
To install and operate the programmer, you need a system that meets the
following minimum requirements:
•
Pentium II-class PC (300 MHz or higher)
•
Windows 98, Windows NT 4.0 with Service Pack 6 installed, Windows
2000 and Windows XP
•
Administrative Privileges on the system
•
Microsoft Internet Explorer 5.0 or higher
•
128 megabytes of RAM
•
Disk Space - 500 MB
•
Super VGA monitor (with the screen resolution set to at least 800 x 600,
small fonts setting, and 256 colors or greater)
•
A serial output port with DB9 or DB25 connector, or a USB port. The
programming kit does not include the USB to Serial Port cable. Users need
to purchase it by themselves if they need to use the USB port instead of the
COM port
Programming Interface
The programming interface kit, shown in Figure 1, supports Minitor IV
codeplug programming. Items included with the interface kit consist of the
following:
•
Programming interface
•
AC/DC adapter/power supply
•
DB25 to DB9 cable
•
DB25 to DB25 cable
•
Coiled cable
6880309M81-A 9/20/2004
1