Motorola MILESTONE 3 User Manual Download Page 60

Page: 60 / 222

to indicate the different call types associated with an alias
or ID.

Radio number.

Radio number added to a Call List.

Mobile number.

Mobile number added to a Call List.

Landline phone number.

Landline phone number added to a Call
List.

Incoming call or data.

Outgoing call or data.

Incoming emergency call.

LED Indicator

Solid red

Radio is transmitting.

Blinking red

Radio is transmitting at low battery condition.

Double blinking red

Radio is in Emergency Mode.

Rapidly blinking red

Radio has failed the self test upon powering up or
encountered a fatal error.

Solid yellow (Conventional Only)

Channel is busy.

Blinking yellow

Radio is receiving a secured transmission.

Solid green

Radio is powering up, or is on a non-priority channel
while in the Scan List Programming mode.

Blinking green

Radio is receiving an individual or telephone call, or is
on a Priority-Two channel while in the Scan List
Programming mode.

English

Send Feedback

Draft

Summary of Contents for MILESTONE 3






























































































































































































































Search results

Summary of Contents for MILESTONE 3

Reviews:

Motorola MILESTONE 3, User Manual, Page: 60 / 222

Search results

Summary of Contents for MILESTONE 3

Reviews: