manualshive.com logo in svg

Motorola MD 491R - 174; 2.4GHz CORDED/CORDLESS PHONE SYSTEM, User Manual, Page: 15 / 64

Share
Download
Motorola MD 491R - 174; 2.4GHz CORDED/CORDLESS PHONE SYSTEM User Manual Download Page 15

13

Getti

ng Started

Powering the Base Station and 
Phone Line Connection

Important: Before installing or handling batteries, 
please read the Battery Safety Instructions on 
page 8.

The base station uses 4 AAA alkaline batteries for 
optional backup power. To install the batteries:
1. With the bottom of the base station facing you, 

press the cover latch with a screwdriver to lift and 
remove the battery cover.

2. Insert 4 AAA alkaline batteries into the battery 

compartment.

3. To replace the cover, insert the tabs of the cover 

into the slots and press down until the cover clicks 
into place.

4. Plug the power cord into the back of the base 

station and into an outlet.

5. Plug one end of the telephone line cord into the jack 

on the bottom of the base station.

6. Plug the other end of the cord into the phone jack.

Battery 
compartment
(cover removed)

4110W32o.book  Page 13  Wednesday, July 16, 2003  2:02 PM

Summary of Contents for MD 491R - 174; 2.4GHz CORDED/CORDLESS PHONE SYSTEM

































































Reviews:

No comments