MCS 2000 Model I
68P81083C05-C
English
page 11
2 minutes prior to automatic power-off, the radio will
generate a continuous low tone and
will flash on the display. Any user action will immedi-
ately cause the radio to cease the automatic power-
off tones and display and return the radio to normal
operation.
SmartZone/AMSS Functions
In SmartZone and AMSS (Automatic Multiple Site
Select) operation the two functions mentioned below
may be programmed into your radio:
Site Search & Site Lock
Press the site search/monitor button (2) to show the
current site and signal strength.
Additionally a bar display is used to reflect the signal
strength level for the current site ranging from 0 to 3
bars:
3 bars indicate a very strong signal and no bar indi-
cates a very weak signal.
Press and hold the site search button (2) to force the
radio to scan for a new site.
If the optional "wide-area roaming" function is pro-
grammed the radio will automatically switch sites as it
moves through your coverage area.
Automatic site switching may be disabled by activat-
ing the site lock function.
Please contact the person in charge of your radio sys-
tem for further information.
Emergency Operation
If emergency is enabled on your system the function is
invoked by pressing the emergency button (5).
Emergency is exited by pressing the emergency but-
ton for approximately 2 seconds.
Trunking only:
Your radio may be programmed to indicate that an
emergency call has been received from another mem-
ber of your talkgroup. The display will then alternate
between
and mode name of the calling party.
If "emergency with voice to follow" is enabled, the
PWR OFF
EMER RCV
MCS2000 1-B UG GBBook Page 11 tirsdag 3. november 1998 12:59
