Motorola MC9500-K - Win Mobile 6.1 806 MHz User Manual Download

Page: 45 / 284

Battery Management 2 - 11

Charging a Spare Battery

Charge a spare battery using one of the following accessories:

•

Single Slot Battery Charger

•

Four Slot Battery Charger

•

Vehicle Battery Charger.

To charge a spare battery:

Ensure the charger is connected to an appropriate power source.

Insert the spare battery into the charger. The spare battery begins charging.

Figure 2-7

Spare Battery in Single Slot Battery Charger

The battery charging and health status is indicated on the front of the battery.

Table 2-7

lists the charging

indications.

Battery Status LED

Charge Level Indicator

Summary of Contents for MC9500-K - Win Mobile 6.1 806 MHz





























































































































































































































































































Search results

Summary of Contents for MC9500-K - Win Mobile 6.1 806 MHz

Reviews:

Related manuals for MC9500-K - Win Mobile 6.1 806 MHz

Brands by name

Popular brands

Motorola MC9500-K - Win Mobile 6.1 806 MHz, User Manual

Search results

Summary of Contents for MC9500-K - Win Mobile 6.1 806 MHz

Reviews:

Related manuals for MC9500-K - Win Mobile 6.1 806 MHz

Brands by name

Popular brands