Motorola MC9500-K - Win Mobile 6.1 806 MHz User Manual Download

Page: 29 / 284

Getting Started

1 - 7

Install the battery.

After completing initial MC9596 setup or after replacing a SIM card:

Press the red

Power

button.

On the Today screen, tap

Wireless Manager

Ensure Phone is on.

Press the red

Power

button to suspend the MC9596.

Perform a warm boot. See

Resetting the MC9500-K on page 3-3

Make a call to verify cellular connection.

Installing the Battery

To install the battery:

Insert the battery, top first, into the battery compartment.

Press the battery down into the battery compartment until the battery release latches snap into place.

Figure 1-11

Inserting the Battery

The MC9500-K powers up automatically after inserting the battery, if the battery has been charged previously.

Charging the Battery

Before using the MC9500-K for the first time, charge the battery using either a charging cable or a cradle:

•

USB Charging Cable

•

Charge Only Cable

•

Single Bay USB Cradle

NOTE

For detailed information about WWAN activation and settings, refer to the

MC9500-K Series Mobile Computer

Integrator Guide

Battery

Battery Release Latch

CAUTION

Ensure that you follow the guidelines for battery safety described in

Battery Safety Guidelines on page 9-2

NOTE

For cable and cradle setup and charging procedures refer to the

MC9500-K Series Mobile

Computer Integrator Guide

Summary of Contents for MC9500-K - Win Mobile 6.1 806 MHz





























































































































































































































































































Search results

Summary of Contents for MC9500-K - Win Mobile 6.1 806 MHz

Reviews:

Related manuals for MC9500-K - Win Mobile 6.1 806 MHz

Brands by name

Popular brands

Motorola MC9500-K - Win Mobile 6.1 806 MHz, User Manual

Search results

Summary of Contents for MC9500-K - Win Mobile 6.1 806 MHz

Reviews:

Related manuals for MC9500-K - Win Mobile 6.1 806 MHz

Brands by name

Popular brands