manualshive.com logo in svg

Motorola MC9500-K - Win Mobile 6.1 806 MHz, User Manual

Share
Download
Motorola MC9500-K - Win Mobile 6.1 806 MHz User Manual Download Page 23

Chapter 1 Getting Started

Introduction

This chapter explains how to set up the MC9500-K for the first time.

Unpacking

Carefully remove all protective material from the MC9500-K and save the shipping container for later storage and 

shipping.

Verify that you received the following:

•

MC9500-K mobile computer

•

4800 mAh Lithium-ion battery

•

Regulatory Guide

•

Quick Start Guide.

Inspect the equipment for damage. If any equipment is missing or damaged, contact the Motorola Enterprise 

Mobility Support center immediately. See

 page xviii

 for contact information.

Prior to using the MC9500-K for the first time, remove the protective shipping film that covers the keypad and 

battery display.

Summary of Contents for MC9500-K - Win Mobile 6.1 806 MHz





























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands