Motorola MC9500-K - Win Mobile 6.1 806 MHz User Manual Download Page 160

Page: 160 / 284

7 - 36 MC9500-K Mobile Computer User Guide

Figure 7-39

PIN Code Request Window

In the

PIN Code:

text box, enter the same PIN entered on the device requesting the bond. The PIN must be

between 1 and 16 characters.

In the

Device Name:

text box, edit the name of the device requesting the bond, if desired.

Tap

to create the bond. The MC9500-K can now exchange information with the other device.

Bluetooth Settings

Use the

BTExplorer Settings

window to configure the operation of the

BTExplorer

application. Tap

Menu >

Settings

. The

BTExplorer Settings

window appears.

Device Info Tab

Use the

Device Info

tab to configure

the MC9500-K’s Bluetooth connection modes.

Figure 7-40

BTExplorer Settings - Device Info Tab

Table 7-3

Device Info Tab Data

Item

Description

Device Name

Displays the name of the MC9500-K.

Discoverable Mode

Select whether or not the MC9500-K is discoverable by other Bluetooth devices.

Connectable Mode

Select whether or not the MC9500-K is connectable by other Bluetooth devices.

Summary of Contents for MC9500-K - Win Mobile 6.1 806 MHz





























































































































































































































































































Search results

Summary of Contents for MC9500-K - Win Mobile 6.1 806 MHz

Reviews:

Motorola MC9500-K - Win Mobile 6.1 806 MHz, User Manual, Page: 160 / 284

Search results

Summary of Contents for MC9500-K - Win Mobile 6.1 806 MHz

Reviews: