Motorola MC909X, Integrator Manual

Page: 278 / 322

B - 2 MC909X Integrator Guide
Configuring iDockIt for Windows Mobile 5.0
To run iDockIt for the first time, tap
Start
>
Programs
from the Today screen and then tap the
iDockIt
icon; iDockIt
opens to the
General
tab. Thereafter, if you need to restart
iDockIt
, tap
Start
>
iDockIt
from the Today screen.
When
iDockIt
is running, you see its icon at the bottom of the Today screen. Tap the icon to display the iDockIt
menu.
Figure B-1
Today Screen showing iDockIt Menu
• Status
displays the
Status
tab.
• Settings
displays the
Settings
tab for the current connection or, if the mobile computer is not connected to a
host computer via a cable or cradle, the most recently viewed settings tab.
• Enable
is a toggle switch that checks/unchecks the
Enable iDockIt
setting on the
General
tab.
• Modem Connect
is enabled when you have defined a modem connection in the modem settings tab. Tapping
this item when the mobile computer is in the modem cradle initiates dial-out.
• About
displays version and copyright information.
• Exit
disables iDockIt and closes the application.
iDockIt includes five tab pages:
• General
- General setup options for enabling/disabling iDockIt and displaying status and other information.
• Ethernet
- Settings for what iDockIt should do when it detects that the mobile computer is in an Ethernet
cradle.
• Direct
- Settings for what iDockIt should do when it detects that the mobile computer is in a Serial or USB
cradle or connected to a host computer using a Serial or USB cable.
• Modem
- Settings for what iDockIt should do when it detects that the mobile computer is in a Modem cradle.
• Status
- Current connection status, continuously updated, scrollable window.
Quick Start
Follow these guidelines. Refer to sections of this appendix devoted to individual tabs for details on settings and
options.