Motorola MC909X Integrator Manual Download Page 17

Page: 17 / 322

About This Guide

Introduction

This guide provides information about setting up and configuring MC909X mobile computers and accessories.

Documentation Set

The documentation set for the MC909X is divided into guides that provide information for specific user needs.

•

Microsoft Application Guide

- describes how to use Microsoft developed applications.

•

Symbol Application Guide

- describes how to use Symbol developed applications.

•

MC909X User Guide

- describes how to use the MC909X mobile computer.

•

MC909X Integrator Guide

- describes how to set up the MC909X mobile computer and the accessories.

•

SMDK Help File

- provides API information for writing applications.

NOTE

Screens and windows pictured in this guide are samples and can differ from actual screens.

Summary of Contents for MC909X



































































































































































































































































































































Search results

Summary of Contents for MC909X

Reviews:

Related manuals for MC909X

Brands by name

Popular brands

Motorola MC909X, Integrator Manual

Search results

Summary of Contents for MC909X

Reviews:

Related manuals for MC909X

Brands by name

Popular brands