Motorola MC9090G - RFID - Win Mobile 5.0 624 MHz, User Manual

Page: 35 / 252

Getting Started 1 - 13
Figure 1-12
Replacing the SIM Door
9.
Press the red POWER button.
10.
On the MC9097, you must preform a master rest after installing a new SIM Card.
a.
Tap
Start
>
Phone
>
Menu
>
Options
>
Error Log
tab.
b.
Tap the
Master Reset
button.
c.
Tap
OK
.
d.
Once an “X” appears in the Phone Antenna icon (wait a few seconds), perform a warm boot.
e.
Wait for the mobile computer to reboot and register with the network, then perform a second warm
boot.
11.
Tap
Start
>
Phone
>
Menu
>
Options
>
Network
tab and verify that the service provider appears in the
Current network:
field.
12.
Make a call to verify connection.
Stylus
Use the mobile computer stylus for selecting items and entering information. The stylus functions as a mouse.
•
Tap: Touch the screen once with the stylus to press option buttons and open menu items.
•
Tap and Hold: Tap and hold the stylus on an item to see a list of actions available for that item. On the
pop-up menu that appears, tap the action you want to perform.
•
Drag: Hold the stylus on the screen and drag across the screen to select text and images. Drag in a list to
select multiple items.
NOTE On the MC9097, it is not recommended that you swap the SIM card with another SIM card. If you do
swap SIM cards, perform step 10.
NOTE For detailed information about WWAN activation and settings, refer to the MC909X Integrator Guide .
On the MC9097, if the SIM door is removed without removing the SIM card, you must warm boot the
mobile computer.