Getting Started 1 - 11
SIM Card
The SIM card, or smart card, is required for MC9094 (GPRS) phone service and must be obtained from the
phone service provider. The MC9097 (iDEN) comes from the factory with an un-activated SIM card installed.
You must contact your service provider to activate the SIM card.
The card fits into the mobile computer and can contain the following information:
•
Mobile phone service provider account details.
•
Information regarding service access and preferences.
•
Contact information, which can be moved to Contacts on the mobile computer.
•
Any additional services to which the user may have subscribed.
To install the SIM card:
1.
Place the mobile computer into the suspend mode by pressing the red
Power
button.
2.
Remove the SIM housing cover on the back of the mobile computer.
Figure 1-8
Removing SIM Cover
3.
Unlock the SIM holder by sliding the metal clip to the open position.
4.
Lift the SIM holder.
NOTE
Subscriber Identification Module (SIM) card is only used in the MC9094 and MC9097 configurations.
NOTE
On the MC9097, it is not recommended that you swap the SIM card with another SIM card.
NOTE
For more information about SIM cards, refer to the mobile phone service provider's documentation.
SIM
Housing Cover
Summary of Contents for MC9090G - RFID - Win Mobile 5.0 624 MHz
