Motorola MC75A User Manual Download

Page: 183 / 232

Maintenance & Troubleshooting 8 - 11

Four Slot Battery Charger

No data transmitted, or
transmitted data was
incomplete.

MC75A removed
from cradle during
communication.

Replace MC75A in cradle and retransmit.

No null modem
cable was used.

Some external devices require a null modem cable. Retransmit
using a null modem cable.

Incorrect cable
configuration.

See the system administrator.

Cable missing or
disconnected.

Re-connect cable.

Table 8-5

Troubleshooting the Vehicle Cradle

Symptom

Possible Cause

Action

Table 8-6

Troubleshooting The Four Slot Battery Charger

Symptom

Possible Cause

Action

Battery not charging.

Battery was
removed from the
charger or charger
was unplugged from
AC power too soon.

Re-insert the battery in the charger or re-connect the charger’s
power supply.

Battery is faulty.

Verify that other batteries charge properly. If so, replace the faulty
battery.

Battery contacts not
connected to
charger.

Verify that the battery is seated in the battery well correctly with the
contacts facing down.

Ambient
temperature of the
cradle is too warm.

Move the cradle to an area where the ambient temperature is
between 0°C (32°F) and 35°C (95°F).

Summary of Contents for MC75A









































































































































































































































Search results

Summary of Contents for MC75A

Reviews:

Related manuals for MC75A

Brands by name

Popular brands

Motorola MC75A, User Manual

Search results

Summary of Contents for MC75A

Reviews:

Related manuals for MC75A

Brands by name

Popular brands