Motorola MC75A User Manual Download

Page: 151 / 232

Accessories

7 - 7

Four Slot Charge Only Cradle

This section describes how to set up and use a Four Slot Charge Only cradle with the MC75A.

The Four Slot Charge Only cradle:

•

Provides 5.4 VDC power for operating the MC75A.

•

Simultaneously charges up to four MC75A devices.

Charging

Insert the MC75A into a slot to begin charging.

Figure 7-4

MC75A Battery Charging

Battery Charging Indicators

The MC75A’s charge LED shows the status of the battery charging in the MC75A. See

Table 1-2 on page 1-7

for

charging status indications.

The 3600 mAh battery fully charges in less than five hours and the 4800 mAh battery fully charges in less than
seven hours.

Charging Temperature

Charge batteries in temperatures from 0°C to 40°C (32°F to 104°F). Charging is intelligently controlled by the
MC75A.

Summary of Contents for MC75A









































































































































































































































Search results

Summary of Contents for MC75A

Reviews:

Related manuals for MC75A

Brands by name

Popular brands

Motorola MC75A, User Manual

Search results

Summary of Contents for MC75A

Reviews:

Related manuals for MC75A

Brands by name

Popular brands