Motorola MC75A User Manual Download Page 147

Page: 147 / 232

Accessories

7 - 3

Single Slot USB/Serial Cradle

This section describes how to use a Single Slot USB/Serial cradle with the MC75A. For USB communication setup
procedures refer to the

MC75A Integrator Guide.

The Single Slot USB/Serial Cradle:

•

Provides 5.4 VDC power for operating the MC75A.

•

Synchronizes information between the MC75A and a host computer. Refer to the

MC75A Integrator Guide

for

information on setting up a partnership between the MC75A and a host computer.

•

Charges the MC75A’s battery.

•

Charges a spare battery.

Charging the MC75A Battery

Connect the cradle to power. Insert the MC75A into the slot to begin charging.

Figure 7-1

MC75A Battery Charging

Charging/Battery Status
LED

Summary of Contents for MC75A









































































































































































































































Search results

Summary of Contents for MC75A

Reviews:

Motorola MC75A, User Manual, Page: 147 / 232

Search results

Summary of Contents for MC75A

Reviews: