Motorola MC75 - Worldwide Enterprise Digital Assistant, User Manual

Page: 31 / 202

Getting Started 1 - 11
Replacing the Main Battery
1.
Press the red Power button to suspend the MC75.
2.
Loosen the handstrap.
3.
Open the battery cover latches on either side of the battery cover.
Figure 1-11
Removing the Battery Cover
4.
Lift the top of the battery cover and remove.
5.
Press the battery release latch on the bottom of the battery to unlock, and lift the battery out of the well.
6.
Insert the replacement battery, top first, into the battery compartment in the back of the MC75.
7.
Press the battery down into the battery compartment until the battery release latch snaps into place.
8.
With the battery cover latches open, insert the cover, bottom first, then press down on the top of the cover.
9.
Close the battery cover latches on either side of the battery cover.
10.
Insert the handstrap through the handstrap slot, then tighten and press down to secure.
The MC75 powers up after inserting the battery and replacing the battery cover.
NOTE Not using a screen protector can affect warranty coverage. To purchase replacement protectors, contact your
local account manager or Motorola, Inc. These include screen protector installation instructions. Part number:
KT-67525-01R Screen Protector 3/pk.
Battery Cover Latch
NOTE Position the battery correctly, with the battery charging contacts on top of the charging contacts in the battery
compartment.