Motorola MC7090CN User Manual Download Page 48 | Manualshive

Page: 48 / 130

background image

3 - 2

MC7090CN User Guide

Security

The current Bluetooth specification defines security at the link level. Application-level security is not specified.
This allows application developers to define security mechanisms tailored to their specific need. Link-level
security occurs between devices, not users, while application-level security can be implemented on a per-user
basis. The Bluetooth specification defines security algorithms and procedures needed to authenticate devices,
and if needed, encrypt the data flowing on the link between the devices. Device authentication is a mandatory
feature of Bluetooth while link encryption is optional.

Pairing of Bluetooth devices is accomplished by creating an initialization key that is used to authenticate the
devices and create a link key for them. Entering a common PIN number in the devices being paired generates
the initialization key. The PIN number is never sent over the air. By default, the Bluetooth stack responds with
no key when a key is requested (it is up to user to respond to the key request event). Authentication of
Bluetooth devices is based-upon a challenge-response transaction. Bluetooth allows for a PIN number or
passkey that is used to create other 128-bit keys used for security and encryption. The encryption key is
derived from the link key used to authenticate the pairing devices. Also worthy of note is the limited range and
fast frequency hopping of the Bluetooth radios that makes long-distance eavesdropping difficult.

Recommendations are:

•

Perform pairing in a secure environment

•

Keep PIN codes private and don't store the PIN codes in the mobile computer

•

Implement application-level security.

Turning the Bluetooth Radio Mode On and Off

Turn off the Bluetooth radio to save power or if entering an area with radio restrictions (e.g., an airplane). When
the radio is off, other Bluetooth devices cannot see or connect to the EDA. Turn on the Bluetooth radio to
exchange information with other Bluetooth devices (within range). Communicate only with Bluetooth radios in
close proximity.

NOTE

To achieve the best battery life in EDAs with multiple radios, turn off radios not in use.

«
...
46
47
48
49
50
...
»

Summary of Contents for MC7090CN



































































































































Reviews:

No comments

Related manuals for MC7090CN

Brand: Nordic ID Pages: 20

Brand: Seuic Pages: 19

7600BG-122-B4EE - Hand Held Products Dolphin...

Brand: Hand Held Products Pages: 102

Brand: Hand Held Products Pages: 248

Brand: AMobile Pages: 60

Brand: Unitech Pages: 32

Brand: Honeywell Pages: 64

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands