Getting Started 1 - 11
Changing the Power Settings
To set the EDA to turn off after a short period of non-use:
1.
Tap
Start
-
Settings
-
System
tab -
Power
icon
- Advanced
tab.
2.
Select the
On battery power: Turn off device if not used
for
check box and select a value from the
drop-down list.
3.
Select
ok
.
Changing the Backlight Settings
To change the backlight settings in order to conserve more battery power:
1.
Tap
Start
-
Settings
-
System
tab -
Backlight
icon
- Battery Power
tab.
2.
Select the
Disable backlight if device is not used for
check box and select a value from the drop-down
list.
3.
Select the
Brightness
tab.
4.
Tap the
Disable backlight
check box to turn off the display backlight, or use the slider to set a low value
for the backlight.
5.
Select
ok
.
Changing the Keypad Backlight Settings
To change the keypad backlight settings in order to conserve more battery power:
1.
Tap
Start
-
Settings
-
System
tab -
Keylight
icon
- Battery Power
tab.
2.
Select the
On battery power: Disable keylight if device if not used
for
check box and select a value
from the drop-down list.
3.
Select the
Advanced
tab.
4.
Tap the
Disable keylight
check box to turn off the keypad backlight.
5.
Select
ok
.
Turning Off the Radios
Turning Off the WLAN Radio
To turn off the WLAN radio, tap the
Signal Strength
icon and select
Disable Radio
. A red X appears across the
icon indicating the radio is disabled (off).
To turn the WLAN radio back on, tap the
Signal Strength
icon and select
Enable Radio
. The red X disappears
from the icon indicating the radio is enabled (on).
Summary of Contents for MC7090CN
