Motorola MC7090CN User Manual Download

Page: 100 / 130

5 - 8

MC7090CN User Guide

Vehicle Cradle

Battery is not

charging.

EDA removed from

the cradle too soon.

Replace the EDA in the cradle. The standard capacity battery

(1900 mAh) fully charges in less than four hours. The

extended capacity battery (3800 mAh) fully charges in less

than eight hours. Tap

Start - Settings - System - Power

to view

battery status.

Battery is faulty.

Verify that other batteries charge properly. If so, replace the

faulty battery.

EDA is not inserted

correctly in the

cradle.

Remove the EDA and reinsert it correctly. Verify charging is

active. Tap

Start - Settings - System - Power

to view battery

status.

Ambient

temperature of the

cradle is too warm.

Move the cradle to an area where the ambient temperature is

between 0

C and 35

Table 5-4

Troubleshooting the Four Slot Ethernet Cradle (Continued)

Symptom

Cause

Solution

Table 5-5

Troubleshooting the Vehicle Cradle

Symptom

Possible Cause

Action

EDA battery

charging LED does

not light up.

Cradle is not receiving

power.

Ensure the power input cable is securely connected to the

cradle’s power port.

EDA battery is not

recharging.

EDA was removed from

the cradle too soon.

Replace the EDA in the cradle. The standard capacity

battery (1900 mAh) fully charges in less than four hours.

The extended capacity battery (3800 mAh) fully charges in

less than eight hours.

Battery is faulty.

Replace the battery.

EDA is not placed

correctly in the cradle.

Remove the EDA from the cradle, and re-insert correctly. If

the battery still does not charge, contact customer support.

The EDA battery charging LED slowly blinks amber when

the EDA is correctly inserted and charging.

Ambient temperature of

the cradle is too warm.

Move to an area where the ambient temperature is between

C and 35

No data transmitted,

or transmitted data

was incomplete.

EDA removed from

cradle during

communication.

Replace EDA in cradle and retransmit.

No null modem cable

was used.

Some external devices require a null modem cable.

Retransmit using a null modem cable.

Incorrect cable

configuration.

See the system administrator.

Cable missing or

disconnected.

Re-connect cable.

Summary of Contents for MC7090CN



































































































































Search results

Summary of Contents for MC7090CN

Reviews:

Related manuals for MC7090CN

Brands by name

Popular brands

Motorola MC7090CN, User Manual

Search results

Summary of Contents for MC7090CN

Reviews:

Related manuals for MC7090CN

Brands by name

Popular brands