background image

2 - 12 MC67 User Guide

Adjusting Volume

To adjust the system volume:

1.

Press the volume buttons on the right side of the MC67 to increase and decrease the system volume. The 

Volume

 dialog box appears.

2.

As the user increases or decreases the volume, the slider moves accordingly. The user can also move the 

slider to adjust the volume.

3.

Select the 

Vibrate 

radio button to turn off the system audio and enable the MC67 to vibrate upon system 

notifications.

4.

Select 

Off

 radio button to turn off all system audio notifications.

Resetting the MC67

There are two reset functions, warm boot and cold boot. A warm boot restarts the MC67 by closing all running 
programs. A cold boot also restarts the MC67, and also initializes some drivers. Data saved in flash memory or 
a memory card is not lost. 

If the MC67 is not functioning properly, perform a warm boot first. If the MC67 still does not respond, perform a 
cold boot.

Performing a Warm Boot

Hold down the red 

Power

 button for approximately five seconds. As soon as the MC67 starts to boot (splash 

screen displays) release the 

Power

 button.

Performing a Cold Boot

To perform a cold boot:

On a numeric or DSD keypad, simultaneously press the red 

Power

 button and the 

 and 

 keys.

On an alphanumeric keypad, simultaneously press the red 

Power

 button and the 

 and 

 keys.

On an PIM keypad, simultaneously press the red 

Power

 button and the 

 and 

 keys.

Locking the MC67

Locking the MC67 turns off keyboard and touch screen functionality. This is helpful when the MC67 is turned 
on and to prevent accidental key presses.

To lock the MC67, tap 

 > 

.

To unlock the MC67, side the 

Lock

 button to the left or right.

Summary of Contents for MC67

































































































































































































































Reviews: