Motorola MC65, User Manual, Page: 62 / 214

3 - 4 MC65 User Guide
Using Call Log
To make a call using Call Log:
1.
Press .
2.
From the Phone shortcut, tap .
3.
Tap the contact or phone number.
4.
Tap SEND or press .
5.
Tap Cancel or press to stop dialing or end the call.
Using Speed Dialing
To make a call using Speed Dialing:
1.
Press .
2.
On the dialpad, press and hold a number associated with the speed dial number set up in Contacts.
3.
Tap Cancel or press to stop dialing or end the call.
Answering a Call
When the MC65 receives an incoming call a dialog box appears. If the phone is set to ring, a ring tone sounds.
Answer or ignore the incoming call.
To answer an incoming call tap Answer or press .
To ignore the incoming call, tap Ignore . This sends the caller to voice mail, depending on the service provider.
Otherwise, this presents a busy signal to the calling party.
Tap or press to end the call.
Incoming Call Features
•
The user can use other programs on the MC65 during a call. To switch back to the phone, press .
Press to end the call.
•
To hold the current call and answer a waiting call, tap Answer to place the current call on hold and
answer the incoming call.
•
To put a call on hold to call another number, tap Hold .
•
To move from one call to another, tap Swap .
ok
NOTE To set up speed dialing see Speed Dial Setup on page 3-10 .
ok
ok
ok