manualshive.com logo in svg

Motorola MC65, User Manual, Page: 20 / 214

Share
Download
Motorola MC65 User Manual Download Page 20

1 - 2

MC65 User Guide

Getting Started

To start using the MC65 for the first time:

•

Install a microSD card (optional)

•

Install the SIM card (GSM only)

•

Install the main battery pack.

•

Charge the MC65.

•

Power on the MC65.

Installing a microSD Card

The microSD card slot provides secondary non-volatile storage. The slot is located under the battery pack. 
Refer to the documentation provided with the card for more information, and follow the manufacturer’s 
recommendations for use.

To install the microSD card:

1.

Remove the handstrap.

2.

Lift the rubber access door.

3.

Slide the SIM card holder door up to unlock.

4.

Lift the SIM card holder door.

Figure 1-1

Lift SIM Slot Holder Door

5.

Lift the microSD card holder door.

6.

Insert the microSD card into the card holder door ensuring that the card slides into the holding tabs on 
each side of the door.

CAUTION

Follow proper ESD precautions to avoid damaging the SD card. Proper ESD precautions include, but 
are not limited to, working on an ESD mat and ensuring that the operator is properly grounded.

Rubber access door

microSD card holder door

SIM card holder door

Summary of Contents for MC65























































































































































































































Reviews:

No comments