Motorola MC65 User Manual Download Page 142

Page: 142 / 214

10 - 10 MC65 User Guide

Figure 10-9

Removing the MC65

Battery Charging Indicators

The MC65’s charge LED indicates the status of the battery charging in the MC65. See

Table 1-1 on page 1-6

for charging status indications.

The 3600 mAh battery fully charges in less than six hours.

Charging Temperature

Charge batteries in temperatures from 0°C to 40°C (32°F to 104°F). Charging is intelligently controlled by the
MC65.

To accomplish this, for small periods of time, the MC65 alternately enables and disables battery charging to
keep the battery at acceptable temperatures. The MC65 indicates when charging is disabled due to abnormal
temperatures via its LED. See

Table 1-1 on page 1-6

Release Lever

Summary of Contents for MC65























































































































































































































Search results

Summary of Contents for MC65

Reviews:

Related manuals for MC65

Brands by name

Popular brands

Motorola MC65, User Manual

Search results

Summary of Contents for MC65

Reviews:

Related manuals for MC65

Brands by name

Popular brands