manualshive.com logo in svg

Motorola MC21XX SERIES, User Manual

Share
Download
Motorola MC21XX SERIES User Manual Download Page 92

7 - 10 MC21XX Series User Guide

USB ActiveSync/Charge Cable

Table 7-5

Troubleshooting the USB ActiveSync/Charge Cable 

Symptom

Possible Cause

Solution

MC21XX battery is 
not charging (LED 
Indicator does not 
light).

Cable is not receiving 
power.

Ensure the power cable is connected securely to both the 
cable and to AC power.

No battery installed.

Install battery.

Battery is faulty.

Verify that other batteries charge properly. If so, replace the 
faulty battery.

The MC21XX is not fully 
seated in the cable.

Remove and re-attach the MC21XX to the cable, ensuring it 
is correctly seated.

During data 
communication, no 
data was 
transmitted, or 
transmitted data was 
incomplete.

Cable removed from 
MC21XX during 
communication.

Reattach cable to MC21XX and retransmit.

Incorrect cable 
configuration.

See the system administrator or refer to the 

MC21XX Series 

MC21XX Integrator Guide.

Communication 
software is not installed 
or configured properly.

See the system administrator or refer to the 

MC21XX Series 

MC21XX Integrator Guide.

Summary of Contents for MC21XX SERIES





















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands