Motorola MC21XX SERIES, User Manual

Page: 22 / 116

1 - 6 MC21XX Series User Guide
The following accessories can also be used to charge the battery:
•
Cradle (and a power supply):
• Single-slot USB Cradle.
•
Cables (and a power supply):
• USB ActiveSync/Charge Cable.
•
Chargers (and a power supply):
• Four-slot Spare Battery Charger.
See Chapter 6, Accessories for charging instructions using the accessories.
Spare Battery Charging
To charge a spare battery:
1.
Connect the Four-slot Battery Charger to the appropriate power source. See Chapter 6, Accessories for
setup instructions.
2.
Insert the spare battery, bottom first, into the spare battery charging slot and gently press down on the
battery to ensure proper contact.
The battery starts to charge automatically. The LED Indicator blinks amber to indicate the battery is charging.
See
Chapter 6, Accessories for charging indications. The battery usually fully charges in less than four hours.
Starting the MC21XX
Press the Power button to turn on the MC21XX. If the MC21XX does not power on, perform a cold boot. See
Resetting the MC21XX on page 2-12 .
When the MC21XX is powered on for the first time, it initializes. The Splash screen appears for a short period
of time. On the MC2180 the
Calibration screen appears.
If the MC21XX does not power on, see Resetting the MC21XX on page 2-12 .
Calibration Screen
Use the
Calibration
screen to align the touch screen:
Fast Blinking Amber Error in charging. Check placement of the MC21XX.
Slow Blinking Amber MC21XX is charging.
Solid Amber Charging complete.
Note: When the battery is initially inserted in the MC21XX, the LED flashes once if
the battery power is low or the battery is not fully inserted.
Table 1-1
LED Indicators (Continued)
LED Indication
NOTE MC2180 only.