Parent Unit Menu Options
15
ENGLISH
4.5
Alarm
1.
Press the
M
button and the menu bar will pop up.
2.
Press the
<
LEFT button or
>
RIGHT button until
is highlighted.
3.
Press the
+
UP button or
-
DOWN button to select the alarm time (
6h
,
4h
,
2h
). (The default setting is Alarm
OFF
.)
If an alarm time is selected, the Parent Unit will beep for about 45 seconds
after every 6, 4 or 2 hour period.
4.6
Camera Control
4.6.1 Add (pair) a camera
1.
Press the
M
button and the menu bar will pop up.
2.
Press the
<
LEFT button or
>
RIGHT button until
is highlighted.
The
menu will pop up.
3.
Press the
+
UP button or
-
DOWN button to select
, and press the
OK
button to confirm.
will pop up.
4.
Press the
+
UP button or
-
DOWN button to select the desired Camera,
and press the
OK
button to start searching for a camera unit. The green
audio level LED will flash rapidly while searching.
5.
Press and hold the
PAIR
button underneath the Baby Unit until the Parent
Unit finds the camera, beeps and the picture from the camera appears.
NOTE
A camera can only be registered to one Parent Unit at any one time.
4.6.2 View a camera
1.
Press the
M
button and the menu bar will pop up.
2.
Press the
<
LEFT button or
>
RIGHT button until
is highlighted.
The
menu pops up.
3.
Press the
+
UP button or
-
DOWN button to select
, and press the
OK
button to confirm.
will pop up.
4.
Press the
+
UP button or
-
DOWN button to select desired Camera, and
press the
OK
button to view the picture from that camera.
