Getting started
11
EN
G
L
IS
H
2.4
Registration
The baby monitors are already pre-registered upon your purchase. You
do not need to register one again unless a Camera unit loses its link
with the parent unit, or you want to register an additional Camera unit.
Up to 4 Camera units can be registered to one parent unit. If you have
more than one Camera unit, please check that you have selected the
correct channel at the Parent unit for that Camera unit before you
attempt to register it again.
To re-register your Camera unit, or register a new Camera unit, follow
the procedure below:
1.
Switch off the Camera unit and remove the small power plug from
the Camera unit.
2.
On the Parent unit, press
to enter menu mode.
3.
Press
(
or
)
until
is selected on the LCD screen.
4.
Press
+
or
-
to select the camera channel (
1
/
2
/
3
/
4
) that you want the Camera unit to pair with.
5.
Press
to start registration.
is displayed during the
pairing process.
6.
Switch on the Camera unit.
Wait 16 seconds for the parent unit to locate the Camera unit and pair
it to the selected channel. A
will be displayed on the LCD screen
if the registration is successful.
If no Camera unit is found, a
will be displayed on the LCD screen.
Switch the Camera unit off and on and repeat the registration
procedure.