PRODUCT SAFE
TY AND RF EXPOSURE COMP
LIANCE
AT
TENTION!
This radio is r
estricted
to occupational use only to sati
sfy FCC
RF energy exposure r
equir
e-
ments.
Before using th
is product, read
the RF energy awarenes
s information
and operatin
g inst
ruc-
tions in the Prod
uct Safety and
RF Exposure
booklet
enclosed w
ith y
our radio (Moto
rol
a
Publicatio
n part nu
mber 688
1095C98) to ensure
compl
iance wit
h RF ener
gy exposure li
mits.
For a list of Motorola-approved
antennas, batteries, and other accessories,
visit
the following we
b
site which lists approved accessories:
http://www.motor
ola.com/cgiss/index.shtml.
MOTO
RO
LA is register
ed in the U.S. Patent and T
rademar
k Office.
All other produ
cts
and service na
mes are the
proper
ty of their
own re
spective ow
ners.
© Motorola, Inc. 2005
1301 E. Algonquin Rd., Schaumburg, IL 601
96
Printed in Malaysia. 01/06. All Right
s Reser
ved.
Before using this produ
ct, read th
e operating in
structions
for safe usage con
tained
in
the
Product Safety
and
R
F Exposu
re book
let enclosed with
your
radio.
*6881098C61*
6881098C61-A
Attaching and Removing the Antenna
To Attach Antenna
To Remove Antenna
1.
Fasten the antenna to the radio by placing
the threaded end of the antenna into the
Antenna Connector.
2.
Rotate the antenna clockwise until tight.
1.
Turn the antenna in a counter-clockwise
direction until it disengages from the radio.
Threaded End
of Antenna
Antenna
Connector
Attaching and Removing the Battery
To Attach Battery
To Remove Battery
1.
Align and fit the battery tongue into the
groove of the chassis of the radio.
2.
Secure the latch at the bottom of the radio.
1.
Unlatch the battery clasp at the bottom of
the radio.
2.
Gently lift the hilt of the battery nearest to
the battery latch away from the housing.
3.
Slide battery downwards to remove.
Attaching and Removing the Belt Clip
To Attach Belt Clip
To Remove Belt Clip
1.
Align mounting rails of the radio with the
grooves of the belt clip.
2.
Slide the belt clip downwards until it clicks
into place.
1.
Lift the release tab.
2.
Slide the belt clip upwards.
Release Tab
Charging your Radio
1.
Turn off your radio and the A/C power sup-
ply to your charger (if they are turned on).
2.
Place your radio in the charger pocket.
3.
Turn on the charger’s A/C power supply.
4.
While charging your radio, the charger’s
LED shows a steady red light. The radio
should be charged at least 16 hours initially
before decreasing charging time to 12 hours.
5.
Turn off the charger’s A/C power supply,
and remove the radio from the charger
pocket.
6.
For more details, refer to the Charger
Manual (6881013Y27).
Charger Pocket
BPR40_UG_text.fm Page 1 Friday, December 2, 2005 11:48 AM
