Motorola LEX L10ig, User Manual

Page: 63 / 194

table to learn more about the behavior of the device when no SIM card, two SIM cards, or a single SIM
card is inserted in the device SIM slots.
Table 3: LEX Power Up on Private or Public SIM Slots
Number of SIM Cards Present LEX Behavior
No SIM card present
• If the device is powering up for the first time
or after a factory reset, then the device
boots up on Public slot by default.
• All subsequent reboots are on the last used
SIM slot.
Two SIM cards present
• If the device is powering up for the first time
or after a factory reset, then the device
boots up on Public slot by default.
• All subsequent reboots are on the last used
SIM slot.
A single SIM card is present (in either of the
slots)
• If the device is powering up for the first time
or after a factory reset, then the device
boots up on Public slot by default.
• All subsequent reboots are on the last used
SIM slot.
Return to Process
Public and Private Carrier Modes on page 62
2.13.2
Switching Modes Using the Power Button
When the LEX device is equipped with Private and Public SIM cards, the Power button can be used to
switch modes.
Prerequisites: Ensure the device is equipped with Private and Public enabled SIM cards.
When and where to use: Use this procedure to switch modes using the power button.
NOTICE: You may need to switch between private and public network modes when you want to
use capabilities provided by one network that are not provided by the other. For example, if the
phone is in private mode, switch to public mode before you can dial numbers that are not
included in the private network.
NOTICE: When switching between private and public network modes, the device undergoes
modem reset by default.
Procedure:
1 Press and hold the Power button until a menu appears.
MN003477A01-A
Chapter 2: Getting Started
Send Feedback 63