Motorola LEX L10i, User Manual

Page: 89 / 186

Chapter 5
Calling
Make a phone call from the Phone application, the People application, or other applications or widgets
that display contact information.
Push-To-Talk (PTT) Calling
The handheld must be provisioned for PTT services on a Motorola Solutions PTT server. To make PTT
calls and how to receive PTT calls on the LEX 10i, see Push-To-Talk for LEX L10ig manual.
Emergency Calling
The service provider programs one or more emergency phone numbers that you can call under any
circumstances, even when the phone is locked, a SIM card is not inserted, or the phone is not
activated. However, the SIM card must be installed to enable preset emergency numbers stored on it.
Emergency numbers vary by country. The device must be switched to public mode to use the
emergency numbers for your country on the public SIM.
The pre-programmed emergency numbers may not work in all locations, and sometimes an emergency
call cannot be placed due to network, environmental, or interference issues. For additional information,
contact your organization’s technical support.
IMPORTANT: The numbers you can call depend on whether the device is in private mode or
public mode. For example, if the device is in private mode, you must switch to public mode
before you can call numbers that are not included in the private network. To switch modes, see
Switching Modes Using the Power Button on page 62 and Switching Modes Using the Settings
App on page 63 .
NOTICE: If your device is licensed for these options, see LEX L10i Service Provisioning Guide
to set up other emergency alert methods.
Audio Modes
The device offers three audio modes for use during phone calls:
• Handset Mode: Switches audio to the receiver at the top front of the device, so the user can use
the device as a handset and is the default mode.
• Speaker Mode: Use the device as if on speaker phone.
• Headset Mode: Connect a Bluetooth or wired headset to automatically switch audio to the headset.
Using a Bluetooth Headset
Use a Bluetooth headset for audio communication when using an audio-enabled application. See
Bluetooth Device on page 150 for information on connecting a Bluetooth headset to the device. Set the
volume appropriately before putting on the headset. When a Bluetooth headset is connected, the
speakerphone is muted.
Using a Wired Headset
Use a wired headset (with 3.5 mm plug) for audio communication when using an audio-enabled
application. Set the volume appropriately before putting on the headset. When a wired headset is
connected, the speakerphone is muted.
Lift the headset cover and insert the headset plug.
MN002347A01-B
Calling
Send Feedback 89