Motorola LEX L10i, User Manual

Page: 40 / 186

CAUTION:
• Electrostatic discharge (ESD) precaution.
• For proper ESD precautions to avoid damaging the SIM card. Proper ESD precautions
include, but not limited to, working on an ESD mat and ensuring that the user is properly
grounded.
When and where to use: Use this procedure to install a SIM card:
Procedure:
1 If the battery is in place, remove the battery as described in Removing the Battery on page 41 .
2 Slide the SIM card into the SIM card holder with the contacts facing down. Note the card notch
position.
3 Push that the SIM card into the holder until it is fully seated and flat.
You should hear a click when the SIM card in fully in place.
Figure 6: Installing the Public and Private SIM Cards
Return to Process
Setting Up on page 36
2.3.6
Removing the Public and Private SIM Cards
When and where to use: Use this procedure to remove the public or private SIM cards.
Procedure:
1 Press and hold the Power button for three seconds.
2 Tap Power Off.
3 Tap OK.
4 Lift the battery cover.
5 Slide the battery latch to Unlock position.
6 Lift the battery out of the device.
7 Push the SIM card to release it from the holder.
8 Remove the SIM card.
9 Place the battery back into the device.
10 Snap the battery cover back into place.
MN002347A01-B
Chapter 2: Getting Started
40 Send Feedback