Motorola LEX L10i, User Manual

Page: 142 / 186

9.1.2.1
Setting Data Usage Warning
When and where to use: Use this procedure to set data usage warning.
Procedure:
1 Tap .
2 Tap .
3 Tap Data usage.
4 Check Set mobile data limit.
5 Drag the red line up/down to the level where you want to limit.
6 Drag the orange line up/down to the level where you want to receive a warning. When your data
usage reaches this level, you' will receive a notification.
Return to Process
Data Usage on page 141
9.1.2.2
Setting Auto-Sync
You can also conserve data usage by syncing your apps manually, only when you need the data,
rather than relying on auto-sync.
When and where to use: Use this procedure to set Auto-Sync.
Procedure:
To turn auto-sync off or on, tap
→
Auto-sync data.
Return to Process
Data Usage on page 141
9.1.3
Disabling Data When Roaming
When and where to use: Use this procedure to prevent the LEX L10i from transmitting data over
other carriers’ mobile networks when leaving an area that is covered by the carrier’s networks. This is
useful for controlling expenses if the service plan does not include data roaming.
Procedure:
1 Tap .
2 Tap .
3 Tap More... .
4 Tap Mobile networks.
5 Un-check Data roaming.
6 Tap .
MN002347A01-B
Chapter 9: Wireless
142 Send Feedback