background image

Figure 29: Status Selection

Tap one of the status states.

Status is immediately set to the selected state.

3.3.2.2

Moving Widgets

When and where to use: Use this procedure to move (relocate) widgets on the Home screen.

Procedure:

Navigate to the Home screen panel where the widget is located.

Touch and hold the widget; then, slide the widget to a new location.

If you want to move the widget to another panel, slide the widget left or right to that panel; then
slide the widget to a location in the panel.

3.3.2.3

Removing Widgets

When and where to use: Use this procedure to remove or clear space on your Home screen.

Procedure:

Slide the Home screen panel until you locate the panel that holds the widget that you want to

remove.

Touch and hold the widget while sliding it down to the bottom of the panel.

X Remove appears near the bottom of the screen.

Slide the widget to X Remove until the widget turns red and your finger is directly above X

Remove; then, release the widget.

The widget is removed from the panel.

NOTICE: The widget is only removed from the panel. It is not deleted from the LEX L10g.

3.3.2.4

Example of a Customized Home Screen Panel

This topic shows you an example of a customized Home screen panel.

MN002858A01-A
Chapter 3:  Using the LEX Series Device

68  

Send Feedback

Summary of Contents for LEX L10g















































































































































































Reviews: