Motorola KVL 4000, User Manual

Page: 172 / 236

KVL 4000 Key Variable Loader ASTRO 25 User Guide
Procedure Steps
1
On the KVL main screen, select
Store & Forward → Forward to radio
.
Step result: A list of available target devices appears.
You can use the Sort button to sort the target devices on the list by:
• Name
• Serial number
• ID
• Update status
You can use the smart bar to scroll through the list or quickly jump within the list to a selected area
(tapping a letter on the smart bar takes you to the first item on the list starting with this letter). If the
list fits completely on the screen, the smart bar is disabled.
2
If the target device is an APX or XTS radio, set it to an OTAR-enabled personality.
3 Connect the target device to the KVL using an appropriate key load cable (see 1.4.4.1 Connecting the KVL to a
Radio or Another Target Device, page 1-13 ) and tap the item for this device on the list.
If there are no updates for the device, it is indicated on the screen and the attention tone is played.
Step result: A progress animation appears, indicating that the device is being updated. When the update is
completed, it is indicated on the screen and the completed tone is played.
4 Disconnect the target device.
5 Connect another target device to update, or tap Done to return to the KVL main screen.
Postrequisites:
After you have performed a successful update on a target device, it cannot be updated again until you have connected
the KVL to the KMF to upload the unit response messages.
7.2.5 Viewing the List of Received Jobs
Prerequisites:
The KVL received keys and jobs for radios from the KMF.
7-16
6871018P37-F - January 2013