27
Channels and Codes
4
Select a code.
5
When you are finished, press
A
under
Back
to
return to the MOTOtalk idle screen.
Making Code Calls
To make a code call:
1
From the MOTOtalk idle screen or the channel
and code edit screen, press and hold the PTT
button.
Transmit
appears on the first line of
display. Begin speaking after your phone emits
the MOTOtalk tone.
Note:
The MOTOtalk tone consists of 4 rapid
beeps.
2
Release the PTT button to listen.
If you receive an error message:
•
No one is on your channel or code.
•
You are out of range.
Receiving Code Calls
When you receive a code call,
Receive
will appear
on the display. After hearing the MOTOtalk tone,
you have 6 seconds to reply before the call times
out.
To reply to the call, press the PTT button.
Note:
An incoming MOTOtalk call can be
terminated at any time by pressing
e
.
Receiving All MOTOtalk Calls
If you set the code to
Receive All
, your phone can
receive MOTOtalk transmissions from any phone
that is set to the same channel, regardless of the
code (1-15). When you receive transmissions with
the code set to
Receive All
, the code that the
transmission was received on will replace
Receive
All
on the display.
Note:
You cannot initiate a code call when the
code is set to
Receive All
.
To set the code to
Receive All
:
1
From the MOTOtalk idle screen, press
A
under
Edit
.
2
Scroll to
Code
.
3
Press
A
under
Edit
.
4
Select
Receive All
.
5
When you are finished, press
A
under
Back
to
return to the MOTOtalk idle screen.
To reply to a call with the code set to
Receive All
:
Press the PTT button.
Summary of Contents for I880 - SOUTHERNLINC
Page 2: ......
Page 4: ......
Page 271: ...259 dialing 57 storing 47 Wallpaper 136 144 210 Warranty 246 Word mode 50 ...