214
Accessory Safety Information
2
Remove Battery and SIM card (if so equipped)
from radio product.
3
Shake excess liquid from radio product.
4
Place the radio product and battery in an area
that is at room temperature and has good air
flow.
5
Let the radio product, battery, and SIM card dry
for 72 hours before reconnecting the battery
and/or powering on the radio product.
If the radio product does not work after following
the steps listed above, contact your dealer for
servicing information.
Clean the external surfaces of the radio product
with a damp cloth, using a mild solution of
dishwashing detergent and water. Some
household cleaners may contain chemicals that
could seriously damage the radio product. Avoid
the use of any petroleum-based solvent cleaners.
Also, avoid applying liquids directly on the radio
product.
Accessory Safety Information
Important: Save these accessory safety
instructions.
•
Before using any battery or battery charger, read
all the instructions for and cautionary markings
on (1) the battery, (2) the battery charger, which
may include a separate wall-mounted power
supply or transformer, and (3) the radio product
using the battery.
•
Do not expose any battery charger to water,
rain, or snow as they are designed for indoor or
in-vehicle use only.
•
To reduce the risk of damage to the cord or plug,
pull by the plug rather than the cord when you
disconnect the battery charger from the power
source outlet.
•
Do not operate any battery charger with a
damaged cord or plug — replace them
immediately.
•
Battery chargers may become warm during
operation, but not hot. If it becomes hot to the
touch, unplug it from the power outlet
immediately and discontinue its use.
Warning: To reduce the risk of injury,
charge only the rechargeable batteries
described in “Charging the Battery” on
page 4. Other types of batteries may
burst, causing personal injury and
damage.
!
!
Summary of Contents for i875
Page 1: ...i875 BoostMobile Phone User s Guide FINAL ...
Page 10: ......
Page 228: ...217 Hearing Aid Compatibility ...