manualshive.com logo in svg

Motorola HC700-i F3130A, User Manual, Page: 29 / 57

Share
Download
Motorola HC700-i F3130A User Manual Download Page 29

17

Direct Action Keys

The direct action keys enable the user a quick access to basic 
operations of the HC700-i without exploring the HC700-i soft-
ware programs.

Virtual Keyboard

To display the virtual keyboard - hold down the <SHIFT> and 
<SP> keys and toggle the Scan button to display or remove 
the virtual keyboard.

Screen Backlight Adjustment

The screen backlight can be adjusted by holding down the 

<SHIFT> key and pressing the up or down bumps 

 to 

increase or decrease the screen backlight.

Turning the Screen Backlight On & Off

Hold down the <SHIFT> for two seconds - the screen back-
light will turn on. To turn off - hold down for another two sec-
onds.
When not in use, the backlight turns off automatically. To 
configure the screen illumination duration and intesity, go to: 

Start Menu -> Settings -> System -> Backlight

.

The Application 

<P1/P2> 

key functionality is set 

by the software application running on the 
HC700-i. Use the <SHIFT> key to toggle between 
P1 and P2. To learn more about these keys, con-
sult the software application guide.
To set the Application key functionality, go to: 

Start Menu ->   Settings ->   Personal ->   But-
tons

.

Table 3: HC700-i - Key Assignment

Key

Function

Enhanced IMD Users.book  Page 17  Tuesday, September 26, 2006  2:17 PM

Summary of Contents for HC700-i F3130A


























































Reviews:

No comments