Motorola FX7400 Series, Integrator Manual

Page: 21 / 116

Getting Started 1 - 7
Step 5, Read Tags
Click
Start Inventory
on the
Reader Operation
window to initiate an on-demand scan and/or to enable or disable
polled read points.
The polling state displays the current polling setting -
Enabled
or
Disabled
. If enabled from the
Administrator
Console
, this displays
Polling State: Enabled from Web
. If enabled from byte stream, this displays
Polling State:
Enabled from byte stream
.
Figure 1-9
Read Tags Window
•
Click
Start Inventory
to start inventory operation on the connected antennas.
•
Click
Stop Inventory
to stop the ongoing inventory operation.
•
Select the
Clear Tag List
check box to clear the current tag list.
The list of tags appears in a table with the following attributes for each tag:
•
EPC Id
: Unique tag EPC ID.
•
TagSeen Count
: Number of times the tag is identified on the specific antenna.
•
RSSI
: Received Signal Strength Indication.
•
Antenna Id
: Antenna ID on which the tag is seen.
•
FirstSeen
time stamp: UTC time (in microseconds) when the tag was first seen.
•
LastSeen
time stamp: UTC time (in microseconds) when the tag was last seen.
NOTE
Enable JVM support on the browser for this page to function properly. See Appendix C, Java Upgrade
Procedures .