manualshive.com logo in svg

Motorola F4707A, User Manual

Share
Download
Motorola F4707A User Manual Download Page 122

99

CHAPTER 7

Bluetooth Connection

Overview of Bluetooth

Bluetooth is a short-range wireless communications technology. Devices with Bluetooth capabilities 
can beam (exchange information) over a distance of about 10 meters (30 feet) without requiring a 
physical connection.

Unlike infrared, you don't need to line up the devices to beam information with Bluetooth. You can 
even beam information to a device in a different room, as long as it's within range.

You can use Bluetooth as follows:

•

Beam information, such as files, appointments, tasks, and contact cards, between your HC700-G 
and other devices that have Bluetooth capabilities.

•

Create a connection between your HC700-G and a Bluetooth-enabled phone.

•

Once you connect to another device or computer using Bluetooth, you can locate and use any of the 
services available on that device.

Tip: Your device might include additional Bluetooth features. For more information, see the 
documentation included with your device.

Summary of Contents for F4707A

































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands