Application Deployment
9 - 3
•
Tools directory
Contains all of the command-line tools to build applications. The most commonly employed and useful
tool is the adb utility.
•
usb_driver
Directory containing the necessary drivers to connect the development environment to an enabled
device. These files are only required for developers using the Windows platform.
Development Settings
Opens the Development screen to set development related settings.
•
USB debugging
- Check to permit debugging tools on a computer to communicate with the ET1
using a USB connection (default - off).
•
Stay awake
- Check to prevent the screen from dimming and locking when the ET1 is connected to a
charger or to a USB device that provides power. Don’t use this setting with a static image on the ET1
for long periods of time, or the screen may be marked with that image.
•
Allow mock locations
- Check to permit a development tool on a computer to control where the ET1
believes it is located, rather than using the ET1’s own internal tools.
ADB USB Setup
In order to use the adb, the USB driver has to be modified. This assumes that the development SDK has been
installed on the host computer. Go to http://developer.android.com/sdk/index.html for details on setting up the
development SDK.
Windows XP and Windows 7 Installation
To install the USB driver on Windows XP or Windows 7 operating system:
1.
Locate the file:
adb_usb.ini
in the
.android
directory.
•
For Windows XP, look in the following folders:
•
<dir>\Documents and Settings\<user_name>\.android\
•
<dir>\Profiles\<user_name>\.android\
•
For Windows 7, look in <dir>\Users\<user_Name>\.android\
2.
Edit
adb_usb.ini
file. If the file is not in the folder, created a new text file in the folder.
a.
Add
0x05E0
to the
adb_usb.ini
file.
b.
Save and close the file.
3.
Locate the
android_usb.ini
file in: <sdk dir>\extras\google\usb_driver.
4.
Edit the
android_usb.ini
file.
a.
Add the following text in the
android_usb.ini
file for both 32 bits [google.NTx86] and 64bits
[google.NTamd64] sections in the file:
;ET1
%SingleAdbInterface% = USB_Install, USB\VID_05E0&PID_1E00
%SingleAdbInterface% = USB_Install, USB\VID_05E0&PID_1E01
%CompositeAdbInterface% = USB_Install, USB\VID_05E0&PID_1E01&MI_0
Summary of Contents for ET1
